Wood furniture can be easily cleaned if soiled with dust, but sometimes arise somewhat difficult stains to remove.
How to clean wood furniture
Wood is one of the most used materials in the furniture. Because of its appearance, practicality and beauty, is certainly the most suitable option.
In the article ” how to clean wood furniture “gave some tips to increase its life and maintain its good looks for years. Now, we will analyze different ways to remove stains, as they are often one of the most common problems.
Remove white spots from wood furniture
The white spots are usually caused by the effect of liquids on lacquered wood furniture, because they do not have protection against them. Although there are times when the very spot just disappears by itself over time, we must get used to this because if you delay us cleaning, may end up taking root more.
To remove liquid stains on wood furniture, we have to pass a very fine sandpaper gently. If it is difficult to remove it, we can choose to use some denatured alcohol, moistening a cloth with it (never apply directly).
Whatever the method used, when we get to the stain disappears we will have to proceed to protect and restore the wood, using a soft cloth and applying two coats of furniture wax. Finally, a bit polish in order to regain the brightness.
Discolorations Repair Wood Furniture
Another flaw that spoils the finish and appearance of our wooden furniture are the discoloration, which usually can be produced by moisture. In this case, we have helped polish the entire surface with a steel sponge moistened with a little linseed oil.
It is very important to follow the original grain of the wood, until we get the stain is completely gone.
Finally, we have only helping clean the surface by a very soft clean cloth with which apply two coats of wax suitable for wooden furniture, polishing finally get back out the original shine.
Remove the black spots on wood furniture
The black spots may appear on the entry of liquid into the interior of the timber. To remove, follow two main steps:
First, we have to rub the stain with sandpaper applying a solution of oxalic acid. It is very important to read the manufacturer’s instructions before applying the acid.
The second step is to paint the wood so that the color is uniform. For this we follow the advice we gave in the note ” How to varnish the wood “
0 comments:
Post a Comment